INDUSTRIAL DOORS - GARAGE DOORS - AUTOMATIONS

ROBUS

Robus 600/1000
 
For sliding gates weighing up to 600kg (RB600) and up to 1000kg (RB1000).
 
Electromechanical gear motor with Nice BlueBUS technology.
Versions with electromechanical limit switch (RB600/RB1000) and with inductive limit switch(RB600P/RB1000P).
 
User-friendly:  the Nice BlueBUS technology,enables to power and control a maximum of seven couples of photocells from the Moonbus series using two wires only.
 
Practical:  the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.
 
Advanced:  RB600 and RB1000are equipped with a temperature sensor: adapt the motor power to the climaticconditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors.This means it is possible to automate 2-leaf sliding gates set opposite each other.
 
Intelligent:  thanks to the obstacle detection system and automatic programming of the working times.Motor absorption is monitored duringmovement, self-diagnosis by means of a flashing light. 8 programming levels.
 
Safe:  acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
 
Sturdy:  aluminium release handlefor easy opening.
 
Very quiet: gear motor on bearings.
 
 _____________________________________________________________________________
 
RobusKit
 
 
For sliding gates max. 350kg complete with Nice BlueBUS technology, making it possible to power and control a maximum of seven couples of photocells from the Moonbus series using two wires only.
 
Gear motor characteristics:
 
user-friendly: the BlueBUS system enables users to connect the photocell couples and   control unit using just two wires
 
practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor
 
advanced:  the speed, strength and pause can all be adjusted
 
intelligent:  thanks to the obstacle detection system and automatic programming of the working times. Motor absorption is monitored during movement, self-diagnosis by means of a flashing light. Acceleration and deceleration can be adjusted
 
safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre
 
very quiet: gear motor on bearings
 
 
 

Technical specifications

RB350

RB600

RB1000

Power                           ( Vac 50/60HZ)

230

230

230

Emergency power supply    ( Vdc)

PS124

PS124

PS124

Max.powered absorbed                     ( VA)

250

515

450

Max.power supply    (A)

1,1

2,5

2,3

Protection level                (ΙΡ)

44

44

44

Nominal torque                      ( Nm)

6

11

17

Max.torque                                 ( Nm)

10

18

21

Speed*                                  ( m/s)

0,18-0,34

0,1-0,3

0,1-0,28

Max gate weight                ( kgr)

350

600

1000

Working temp.              (Co )

-20÷+50

-20÷+50

-20÷+50

Work cycle*                        ( %)

50

40

70

Weight                                     ( kgr)

8

11

13

 
 
 
 

5th Klm. Thessalonikis - Moudanion,
P.O. Box 60305, P.C. 57001
Thermi - Greece
Tel.: +30 2310 473.452 - 471.661 - 471.179
Fax: +30 2310 473.554

active³ 4.7 · © 2000 - 2007 IPS Ltd · Disclaimer